These tests were long and took me hours of note taking but it payed off i got a 97% on C only missing 2 problems. The parts covered in this area were :
Wear analysis concepts & common wear types
Abrasive wear
Adhesive wear
Erosive wear
Cavitation erosion wear
Corrosion
Fretting corrosion
Contact stress fatigue wear
I learned the five basic wear analysis concepts which are :
1-observe surface features
2-identify wear type
3-observe wear location
4-list enabling conditions
5-determine what to do next to gather more facts
I learned that if you follow these steps you will find the reasons and places your parts have failed. If you pay attention to the wear type,surface facts will help you identify what type of wear it is. Then look at the location of the wear these things will help you think about possible problems with loading,alignment,clearances, and lubrication.
40 week
80 month
C 97%
D 92%
I got a 92% on D only missing 5 problems
The areas studied in d were shorter and it covered the steps of wear condition.
Step 1 State the problem
Step 2 Organize fact gathering
Step 3 Observe and record facts
Step 4 Think with the facts
Step 5 Determine the root cause
Step 6,7, and 8 Get the payoff
I learned how to observe and determine wear conditions in parts and how to catalog parts for dis-assembly
Sunday, March 16, 2014
Monday, March 10, 2014
Oil Change Worksheet
This is the worksheet we did about the cm570 it was a good time to use Cummins Quick Serve. It was kinda tough because all the info was there but in different places i had to search for a while to get all the answers. I've done oil changes on trucks before but never had this info at my fingertips i will definitely be using it again.
40 week
40 month
Monday, March 3, 2014
drill bit sharpening
I started with a really rough 7/8 drill bit and had to hand sharpen it with the grinder and the angle gauge.
First I made the top to round but on my second try I ripped right through 3/8.I really enjoyed learning this I've always wanted to know how to sharpen bits now i'm good at it.
40 week
160 month
Thursday, February 20, 2014
Failure Analysis A & B
I finished my cat failure analysis tests today numbers 1 and 2 they were long roughly 60 questions on each with over 160 pages of material to cover and take notes on. I learned a lot about metallurgy. From cast to powder metal forging to quenching in water oil or air all very interesting stuff i had no idea about before this. I also learned about extrusion which is the process of forcing a piece of metal into a desired shape.We learned about heat treating metals.The Rockwell measuring system That CAT uses which measures the hardness in steel by measuring the depth of a dent, and Brinell which measures the diameter of the dent ( CAT uses Brinell to measure cast iron).We learned about brittleness and ductility in metals. We learned about tensile strength,fatigue strength,and yield strength. We learned about load types, tensile, compression, bending, torsion, and shear. the 4 characteristic that identify fractures textures, reflectivnes , surface fractures and color. All in all i learned a ton of new stuff from these two tests
A 87%
B 97%
A 87%
B 97%
40 week
120 month
Tuesday, February 18, 2014
Rigging and lifting
I learned how to rig and lift several different objects from engine blocks to concrete blocks. I used a rigging block and different pieces of rigging off the rigging tree. We used math to calculate the lbs of the objects before we lifted and actually weighed them .
40 week
80 month
40 week
80 month
Monday, February 10, 2014
hydraulic clamping force on a grade 5 bolt lubed and dry
I used a grade 5 bolt with a hrdraulic adapter to measure the clamping force of this bolt dry and lubed.
40 week
40 month
Monday, February 3, 2014
McMaster car fastner id checklists
I used McMaster Car .Com
to get these fastener boxes identified. I will definitely be using this site for future parts number id and ordering.
40 week
152 month
to get these fastener boxes identified. I will definitely be using this site for future parts number id and ordering.
40 week
152 month
Subscribe to:
Posts (Atom)



.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)

.jpg)
.jpg)
