Monday, March 23, 2015

Maintenance Week

40 week
120 month

This week I just did a bunch of preventative maintenance on some equipment around the farm getting geared up for next month's field work. Lots of greasing zerks on the discs and plows we use. Changed one of the bearings on the disc blade. I also changed the oil on 4 tractors and 2 silage dump trucks.

Monday, March 16, 2015

Milk tank destruction

40 week
80 month

This week I spent the whole week with a torch cutting 2 old milk tanks into pieces to send to scrap. I learned if you cut the pieces small enough you won't need a forklift to load them on the trailer.

Monday, March 9, 2015

Preventative Maintenance

40 week
40 month

Pretty slow week just did a bunch of preventative maintenance on some tractors oil changes and coolant flushes. Also I changed 2 tires on the silage truck and installed a new cb radio system in it. I learned that changing tires by hand without a machine never gets easy.

Monday, March 2, 2015

Trailer wiring

40 week
160 month

This week I rewired a hay trailer it took me all week to run new wiring and redo the lights with new ones. I learned that if you take your time and measure right you will have enough wiring. I ended up having to rerun the negative because I was a foot short lesson learned.

Monday, February 23, 2015

Starter n torch Week

40 week
120 month

This week I changed two tires on a silage truck. Also I changed the starter on the same truck. I cut up a old plow with a cutting torch for recycle that was fun I learned that if you take your time you will make better cuts and it'll come apart easier. I also learned that steel stays hot for a long time and burns skin easily.

Tuesday, February 17, 2015

Radiator and power steering pump

40 week
80 month

This week I learned how to change out a radiator and water pump on a John deer tractor by myself and the power of the Internet. .I also had to change out the power steering pump on one of the silage trucks on the farm .I learned that if you take your time you can do the job properly and the repair will last. .

Monday, February 9, 2015

Torch time

40 week
40 month

This week I cut apart a disc implement for recycling with a torch it took me 4 days to get it into small enough pieces. Also I changed the oil on a older Kenworth silage dump truck. I learned you need to go slow with the torch to get good cuts.